Loading Meetings

« All Meetings

Scalextric Inline and Racer Sideways Group 5

January 4, 2022 @ 08:00 - 17:00

Scalextric Inline

  • Any Scalextric car with an inline motor configuration is permitted
  • The magnet must be removed
  • Motor, gears and guide must be as originally supplied new
  • Where present, the bulge on the chassis underneath the gear can be removed
  • Any rubber tyre that fits the hub may be used (branding should be visible on the sidewall)
  • Front tyres may be low profile and glazed
  • Ballast may be added but must be inside the car and securely attached
  • Rear wing must be attached before any race start
  • Rear view mirrors, window wipers and aerials can be removed.
  • No light weight interiors or body/chassis lightening is allowed
  • Light sanding of the body and or chassis to give bodyrock is permitted
  • Tyre treatments are allowed but must be dry when placed on track

Free components

All screws, lead wire, braid and spacers.

Charlie Whiting (R.I.P.) said, “If in doubt, if the rules do not mention it, best consider it illegal.”

Racer Sideways Group 5

  • Any Racer Sideways Group 5 car is allowed
  • The magnet must be removed
  • Body and chassis must remain standard
  • Rear wing must be attached before any race start
  • Rear view mirrors, window wipers and aerials can be removed.
  • No light weight interiors or body/chassis lightening is allowed
  • Motor and gears must be as originally supplied new
  • Wheels as originally supplied new
  • Original motor pods may be replaced with Slot It alternatives
  • Any rubber compound tyre that fits the standard hubs can be used
  • Front tyres may be changed to a low profile, can be glued, trued and glazed as required
  • Tyre treatments are allowed but must be dry when placed on track
  • Ballast may be added but must be inside the car and securely attached

Free components

All screws, lead wire, eyelets, braid and spacers.

Charlie Whiting (R.I.P.) said, “If in doubt, if the rules do not mention it, best consider it illegal.”